Connectors, Lanyards, Fall Arrestors

	*Petzl MGO* $93.50 Directional connector with very large gate opening and automatic locking Gate opening sufficient to fit over 52mm scaffold bars Designed for connecting to metallic structural members of large size, as well as large diameter cables and bars. Very large size and wide gate opening facilitate use on metallic structures. Ergonomic unlocking & opening system. Certification CE EN 362 Breaking Strength 25kn
	*Petzl Grillon* $230.00 2m $245.00 3m $259.00 5m $280.00 10m Also available in 5, 10 & 20m lengths to order. Long adjustable lanyard for rapid installation of a temporary horizontal lifeline. The self locking device allows easy adjustment of the length and tension between two anchor points.
	*Petzl Jane Lanyard MGO 1m* $149.00 Non-adjustable lanyard in dynamic rope fitted with an MGO connector Mainly intended for back-up systems on metal structures. Large, auto locking connector; attaches easily to metallic structures: Permanently attached to lanyard to help prevent loss, Captive eye helps maintain correct orientation. Sewn ends with plastic sleeve: protects against abrasion.
	*Petzl Jane* $45.95 0.6m $49.95 1m $52.00 1.5m $65.00 2m Non-adjustable dynamic rope lanyard Used alone for work positioning, or combined with an energy absorber for integration into a fall arrest system. Allows anchoring to a fixed point or a horizontal lifeline (the height of the attachment point on the harness must never be above the anchor point). Sewn ends with plastic sleeve: helps hold the connector in the correct position and protects against abrasion. Other lengths available to order.
	*Sterling Lanyards* $35.00 0.6m $39.00 1m $42.00 2m Non-adjustable dynamic rope lanyards in different lengths.
	*Petzl Spelegyca* $49.50 Asymmetrical Y-shaped lanyard in flat sewn webbing Choice of long or short lanyard according to the situation, The 2 arms allow the user to remain connected to the safety system when passing intermediate anchor points. Ends fitted with a STRING to help hold the connector in the correct position and to protect against abrasion. Flat sewn webbing for greater resistance to cutting and sharp edges, as well as to abrasion and aging. NB: The SPELEGYCA is not an energy absorber.
	*Ferno Energy Absorber* $95.00 The Energy Absorber is designed to absorb the forces or shock load of a fall. It is to be connected directly to an approved lanyard and fall arrest harness. Maximum capacity is one person. Includes twp rapides. Length without maillon rapides 300mm.
	*Petzl Absorica-I* $85.00 Webbing lanyard with energy absorber Designed for protection on a rope or cable lifeline, or on a metal rail. 80 cm length gives optimal freedom of movement and the ability to reach the connector at the end of the lanyard. End fitted with a STRING to help keep the connector in the correct position and to protect against abrasion. Requires clearance height of 4.35 meters.
	*Petzl Absorica-Y* $110.00 Webbing lanyard with energy absorber Designed for protection on a rope or cable lifeline, or on a metal rail in particular where intermediate anchor points need to be passed.. 80 cm length gives optimal freedom of movement and the ability to reach the connector at the end of the lanyard. End fitted with a STRING to help keep the connector in the correct position and to protect against abrasion. Requires clearance height of 4.35 meters.
	*Petzl Asap* $359.00 w 20cm ASAP’sorber $369.00 w 40cm ASAP’sorber Mobile fall arrester for use on a safety rope. Stops a fall, slide or uncontrolled descent. Locks even if the device is grabbed during a fall. Works on vertical or angled rope. Moves along the rope without manual intervention (downwards and upwards). Easy to install and remove at any point on the rope.
	*Petzl Asap’sorber 40cm* $49.95 Energy absorber with integrated lanyard for the ASAP Designed to connect the ASAP mobile fall arrester to a harness. The energy generated from a fall is absorbed by the tearing of specific stitching. Terminations equipped with STRINGs to hold the connector in position and protect the webbing from abrasion. Also available in 20cm to order.
	*Petzl Swivel* $130.00 L $99.95 S Large and small sizes Prevents the rope from twisting when the load is turning. Mounted on sealed ball bearings. SWIVEL S: compact, designed for one-person loads. Breaking Strength 23kn SWIVEL L: designed for two-person loads, up to 3 connectors can be attached in the ends. Breaking Strength 36kn
	*Fixe Swivel* $79.95 Economical swivel alternative Breaking Strength 30kn
	*Faders Swivel* $199.00 Excellent strength-to-weight ratio swivel with a high breaking strain. Sealed ball bearing. Prevents the rope from twisting when the load is turning. Breaking Strength 44kn
	*Faders Atlas Rigging Plate* $109.00 Breaking Strength 52kn
	*Faders Titan Rigging Plate* $59.00 Breaking Strength 36kn
	*Petzl Paw Plate S* $44.95 Anchor Plate Breaking Strength 36kn
	*Petzl Paw Plate M* $85.00 Anchor Plate Breaking Strength 36kn
	*Petzl Paw Plate L* $135.00 Anchor Plate Breaking Strength 36kn