Descenders

	*Petzl I’D S* $349.00 Self-braking descender belay device with anti-panic function Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope. Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope. Locking position on the handle for positioning while on the rope. When used for hauling, allows the system to be reversible. D20 S for work on ropes. With a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors. For ropes between 10 and 11,5 mm in diameter. I’D Lge suitable for ropes 11.5 - 13mm available to order
	*Petzl Rig* $234.95 Designed for rope access work (expert users only) Multi-functional handle allows the user to: - unblock the rope and control the descent with the hand on the free end of the rope - position himself while on the rope without tying off the device The automatic return system on the handle limits risks in case of an involuntary action by the user Handle storage position reduces the risk of snagging when the descender is being carried on the harness The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope and passing intermediate anchors Pivoting cam facilitates taking up the slack in the rope. Can also be used to make a reversible haul system, and for short ascents (in conjunction with a FOOTPRO foot loop and an ASCENSION handled rope clamp). For single ropes between 10.5 and 11.5 mm in diameter
	*Petzl Stop* $179.00 Self-braking descender for single rope Self-braking system operates when the handle is released. The rate of descent is controlled by varying the grip on the free end of the rope. Rope climbing is possible without changing the position of the STOP by adding a foot loop and a handled rope clamp / grab. Spring clip allows the rope to be inserted without removing the STOP from the harness. Replaceable cam and friction bobbin.
	*Petzl Gri Gri* $149.95 Self-braking belay device and descender For work positioning on inclined surfaces and for switching between short ascents and descents on a rope. Simple to use: control the rope running through the device by varying the grip on the free end of the rope, use the handle to unlock the rope, self-braking system: if the handle is released during descent, the cam rotates to pinch the rope and brake the user's descent. Allows for belaying a leader or second. If a fall occurs, device facilitates braking.
	*Petzl Rappel Rack* $149.95 Variable friction descender Allows the friction to be varied when the descender is under load to adapt to changing conditions (rope weight, terrain, etc). The number of bars engaged on the rope may be adjusted at any time to obtain the desired amount of friction. Good distribution of friction and heat helps preserve the rope. Does not twist the rope.
	*Faders Figure 8* $29.00 Classic style descending device Breaking Strength 40kn
	*Faders Sum* $129.00 The SUM is a new generation belay descender device designed to be used with a UIAA single ropes from 10.5 to 9.1mm in diameter, which makes it unique in the market. Its exclusive and innovative concept, not only arrests the wide rope diameter variation of ropes 10.5 to 9.1mm , but also achieves dynamic braking. The Sum arrests and holds with significantly reduced shock loading on the belay and safety chain components. The climber, the belayer, the belay system and anchors benefit from this impact reduction, increasing security and useful life of the whole belay system Components.
	*Anthron Double Stop* $189.00 The Doublestop is an easy to use and safe descender. Because of it's unique design it stops descent both when not being held at all and also when squeezed tightly in a "panic grip". The lever is squeezed slightly for a silky smooth descent. Suits ropes from 8mm to 11mm.