PETZL ASAP LOCK + 20CM ASAP-SORBER

Mobile fall arrester with locking function, plus 20cm lanyard with energy absorber.

The ASAP LOCK mobile fall arrester is designed to facilitate manipulations during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. In case of shock or sudden movement, the fall arrester locks on the rope and stops the user. The ASAP LOCK's integrated locking function allows the user to immobilize the device to reduce the length of a fall. The connection arm makes the system loss-resistant when passing intermediate anchors. This product includes the ASAP LOCK and the 20cm ASAPSORBER, an energy absorbing lanyard to work at a distance from the rope.

• Constant fall protection:
  - arrests falls, slides, and uncontrolled descents
  - works on vertical or angled rope
  - locks on the rope even if grabbed during the fall
• Integrated locking function allows the user to immobilize the device to reduce the length of a fall. In case of a strong wind, this function also prevents the rope from being blown upward.
• Simple to use, and effective:
  - moves up or down the rope without any manual manipulation of the device
  - easy to install and remove at any point on the rope
  - connection arm makes the system loss-resistant when passing intermediate anchors
  - is used with an ASAP’SORBER energy absorbing lanyard to work at a distance from the rope

ASAPSorber Lanyard

• Designed to connect the ASAP mobile fall arrester to a harness
• The energy generated from a fall is absorbed by the tearing of specific stitching
• Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion
• Available in two lengths, to get the desired distance from the safety rope, to reach the best compromise between distance from the rope and height of the fall:
• - ASAP’SORBER (L71AA 20): 20 cm (weight 75 g)